Ingersoll Rand 39160908 Compressor V-Belt Ingersoll-Rand Online Store

Ingersoll Rand OEM 39160908 Replacement V-Belt for EP50SE Rotary Screw Air Compressors

The 39160908 belt is associated with many of the older EP-SE series Ingersoll Rand 50hp compressors. These units were typically manufactured by Ingersoll Rand in the early and mid 1990’s. 39160908 is roughly 67″ long.

Note that this 39160908 belt is sold in a quantity of 1. Most compressors require either 5 or 6 belts per machine, so it is advised to purchase multiple.

Replacing the drive belt should be done on a yearly basis to ensure proper operation of the air compressor. Not changing the belts can cause them to become loose, which will slip and cause overheating, reduction in belt life, and a loss of compressor efficiency. Instructions are included in the operators manual on how to properly install the belt and ensure proper tension. A loud squeel from the compressor is a sign of a bad belt.

This is an OEM part from Ingersoll Rand. Please note that there are several different styles of belts used on the Ingersoll Rand SE series. Please contact our parts department if you would like confirmation this will work with your air compressor.

This belt is most commonly associated with the below models.

• XF50SE
• EP50SE
• HP50SE